SPL-2B Antenna Splitter/Combiner 
          
          ApexRadio SPL-2B
          The SPL-2B allows two receivers to be connected to one antenna without
          interaction and with minimal signal loss. SPL-2B can also be used in reverse.
          That is, as an antenna combiner for two antennas to one receiver. This
          device is operational from Medium Wave to 650 MHz.
          
          
          
          A high degree of isolation (30 dB typ) between both receivers ensures that
          each receiver can be tuned and operated as if it were connected to its
          own antenna. 
          This is a passive (not amplified) device. The SPL-2B uses three BNC jacks.
          
SPECIFICATIONS
          
          
          Frequency Range: 1000kHz - 650MHz 
          Isolation : 30dB (typ.)
          Insertion Loss : 0.25 dB (typ.)
          Connectors : BNC jack
          Impedance : 50 ohrms
          Dimenstions : 70 x 64 x 21 mm
          Weight : 70g. (approx.)
          EAN / JAN : 4573533000206
          
          Click here to view 
SPL-2B Japanese/English Instruction Sheet
          
           
          
          Signal Loss
           
          
VSWR
           
            
           
          
Related products, accessories
303WA-2 LW-SW receiving atenna
35BNC-AT3 antenna adapter with variable attenuator & surge arrester 
35BNC-2 adapter cable with surge arrester
IT5050 galvanic Isolation Transformer
SPL-2B Antenna Splitter / Combiner
HPF2050 High Pass Filter (fc:2MHz)
VS2000N Discone antenna (100MHz - 2000MHz) 
VS3000  Discone antenna (100MHz - 3000MHz)